SubscribeSign In
j
Collection by Joe Shmoe

Shipping Container

View 21 Photos
The roof of this residence was made from scraps taken from the sides of the shipping containers. Its slanted design creates a wind tower effect that provides natural ventilation and negates the need for air-conditioning.
The roof of this residence was made from scraps taken from the sides of the shipping containers. Its slanted design creates a wind tower effect that provides natural ventilation and negates the need for air-conditioning.
Throughout the house, Robertson, Nichols, and Walker emphasized the beauty of the natural finishes and colors of the materials they chose. Robertson originally was going to paint the overhead beams but left them in their raw state to match the tiger bamboo that covers the floor. The light wall around the master bedroom, made from Enduro Systems fiberglass, is a light turquoise on the bedroom side, amber on the living room side, and glows green at night when the lights between the two layers are turned on.
Throughout the house, Robertson, Nichols, and Walker emphasized the beauty of the natural finishes and colors of the materials they chose. Robertson originally was going to paint the overhead beams but left them in their raw state to match the tiger bamboo that covers the floor. The light wall around the master bedroom, made from Enduro Systems fiberglass, is a light turquoise on the bedroom side, amber on the living room side, and glows green at night when the lights between the two layers are turned on.
Poteet replaced one wall with a large steel-and-glass lift-and-slide window wall, which he says makes the best use of indirect light. “The big sliding door and picture window make the 250-square-foot living space feel big,” says Hill.
Poteet replaced one wall with a large steel-and-glass lift-and-slide window wall, which he says makes the best use of indirect light. “The big sliding door and picture window make the 250-square-foot living space feel big,” says Hill.
Jon Ahrens of Madrone Landscaping, who layed out the plantings around the container, implemented a green roof on a drip watering system. The cantilevered overhang at rear is planted with cacti.
Jon Ahrens of Madrone Landscaping, who layed out the plantings around the container, implemented a green roof on a drip watering system. The cantilevered overhang at rear is planted with cacti.
Owner Stacey Hill was instantly drawn to this shipping container’s existing blue color and chose to leave it unchanged. Architect Jim Poteet added floor-to-ceiling sliding doors to allow light in, as well as a cantilevered overhang to shade a window on the left side, which houses a small garden storage area.
Owner Stacey Hill was instantly drawn to this shipping container’s existing blue color and chose to leave it unchanged. Architect Jim Poteet added floor-to-ceiling sliding doors to allow light in, as well as a cantilevered overhang to shade a window on the left side, which houses a small garden storage area.
Since the only spot for a sink was within the main living space, Poteet designed a wide, sculptural basin that would integrate well into the interior, and added a Zurn faucet. The small step leads right into the shower and toilet area. The artworks are by San Antonio artists John Mata, Kimberly Aubuchon, Chris Sauter and Cruz Ortiz; the X came from an old Texaco sign.
Since the only spot for a sink was within the main living space, Poteet designed a wide, sculptural basin that would integrate well into the interior, and added a Zurn faucet. The small step leads right into the shower and toilet area. The artworks are by San Antonio artists John Mata, Kimberly Aubuchon, Chris Sauter and Cruz Ortiz; the X came from an old Texaco sign.
Friends of both the resident and the architect post up on the porch. Poteet attached beams to the container and topped them with a Polygal sheet for shade. The lamps were custom made by the architect from recycled tractor parts fitted with vapor lamps.
Friends of both the resident and the architect post up on the porch. Poteet attached beams to the container and topped them with a Polygal sheet for shade. The lamps were custom made by the architect from recycled tractor parts fitted with vapor lamps.
“Stacey’s property abuts an artists’ colony, so she didn’t want the container to wall off her friends, so we used a bamboo hedge behind it as a way of protecting it from sun yet remaining welcoming to her neighbors.”
“Stacey’s property abuts an artists’ colony, so she didn’t want the container to wall off her friends, so we used a bamboo hedge behind it as a way of protecting it from sun yet remaining welcoming to her neighbors.”
In the house that Richard Williams designed for David Frum and Danielle Crittenden Frum on Lake Ontario, floor-to-ceiling windows from Oldcastle offer views through the house to the lake beyond.
In the house that Richard Williams designed for David Frum and Danielle Crittenden Frum on Lake Ontario, floor-to-ceiling windows from Oldcastle offer views through the house to the lake beyond.
The living room, dining area, and kitchen are connected, which helps light permeate the space. Photo by Frank Oudeman.
The living room, dining area, and kitchen are connected, which helps light permeate the space. Photo by Frank Oudeman.
In his home office, Wardell runs his online art gallery Chester's Blacksmith Shop and researches his next project: opening a boutique hotel in New Zealand. His nephew peeks down from the "napping nook" secreted above the office. The desk is from Room & Board.
In his home office, Wardell runs his online art gallery Chester's Blacksmith Shop and researches his next project: opening a boutique hotel in New Zealand. His nephew peeks down from the "napping nook" secreted above the office. The desk is from Room & Board.
In February of 2007, two San Francisco art and travel addicts purchased a 3,200-square-foot former Chinese laundry and tooth-powder factory with column-free interiors and a zigzagging sawtooth roof in lower Pacific Heights. They customized a pair of shipping containers to accommodate their collection and reflect their passions, and hired a local company to sandblast the interior to expose the board-formed concrete walls and replace the carpeted floors with Georgia hickory pecan planks to further lengthen the loft and make it look more like a warehouse.
In February of 2007, two San Francisco art and travel addicts purchased a 3,200-square-foot former Chinese laundry and tooth-powder factory with column-free interiors and a zigzagging sawtooth roof in lower Pacific Heights. They customized a pair of shipping containers to accommodate their collection and reflect their passions, and hired a local company to sandblast the interior to expose the board-formed concrete walls and replace the carpeted floors with Georgia hickory pecan planks to further lengthen the loft and make it look more like a warehouse.
Two San Francisco art and travel addicts overhauled a loft—and customized a pair of shipping containers—to accommodate their collection and reflect their passions. The shipping containers were stacked, joined with steel tubes, and lashed to reinforced floor joints to make them earthquake-safe.
Two San Francisco art and travel addicts overhauled a loft—and customized a pair of shipping containers—to accommodate their collection and reflect their passions. The shipping containers were stacked, joined with steel tubes, and lashed to reinforced floor joints to make them earthquake-safe.
This modular home prototype by Meka is a shipping container clad in cedar.
This modular home prototype by Meka is a shipping container clad in cedar.
Maziar Behrooz designed this container studio set amid lush trees.
Maziar Behrooz designed this container studio set amid lush trees.
Studio H:T designed this shipping container home on Nederland, Colorado.
Studio H:T designed this shipping container home on Nederland, Colorado.
The home was built by two construction workers and the couple themselves, who were familiarized with the construction process and had backgrounds in industrial engineering. “We did not have blueprints for this design, and created only a 3-D model to guile them along the way,” Saxe says.
The home was built by two construction workers and the couple themselves, who were familiarized with the construction process and had backgrounds in industrial engineering. “We did not have blueprints for this design, and created only a 3-D model to guile them along the way,” Saxe says.
The 1,668-square-foot three-bedroom home is made of four colorful, crisscrossed containers equipped with a simple ventilation system that facilitates a constant breeze.
The 1,668-square-foot three-bedroom home is made of four colorful, crisscrossed containers equipped with a simple ventilation system that facilitates a constant breeze.

1 more save